Asphalt Rubber Technology Information Center
© 2015 - Rubber Pavements Association (RPA). All rights reserved.
               State, County and City Specifications

Florida Department of Transportation Asphalt Concrete Friction Courses Section 337
This mixture selection guide for flexible pavements provides designers with recommendations for selecting hot mix asphalt (HMA) types based on factors such as traffic
volume, loading characteristics, design speed and desired performance...
Read More

Florida Department of Transportation Asphalt Rubber Binder Specification Section 336
Produce asphalt rubber binder for use in Asphalt Concrete Friction Courses and Asphalt Rubber... Read More

Florida Department of Transportation Asphalt Rubber Membrane Interlayer Section 341
Construct an asphalt rubber membrane interlayer composed of a separate application of asphalt rubber binder covered with a single... Read More

Green Book - Asphalt Rubber and Aggregate Membrane (ARAM) Surfacing or Interlayer Section 203-12
ARAM surfacing or interlayer shall involve cleaning and preparing the existing surface, spreading asphalt rubber and cover... Read More

Green Book - Asphalt Rubber Hot Mix (ARHM) Wet Process Section 203-11
Asphalt Rubber Hot Mix shall consist of a mixture of paving asphalt, asphalt modifier, crumb rubber modifier (CRM),  and aggregate mixed in a central mixing plant, all
conforming...
Read More

Guide Specification for Open, Dense, and Gap-Graded Asphalt Concrete Pavements with Asphalt-Rubber Binder
This specification covers material, equipment, and construction procedures for an asphalt concrete pavement using a reacted asphalt-rubber binder... Read More

New Jersey Department of Transportation Section 402
This Section describes the requirements for constructing open-graded friction courses (OGFC), modified open-graded friction courses... Read More

Ohio Department of Transportation Supplemental Specification 803
This work shall consist of constructing a surface course of aggregate, asphalt cement and rubber compound mixed in a central plant and spread... Read More

Specification Guidelines
This specification is intended to be a guide for highway agencies.  Appropriate modifications should be made to reflect local conditions and... Read More

Texas Department of Transportation FlexPave Guide
This mixture selection guide for flexible pavements provides designers with recommendations for selecting hot mix asphalt (HMA) types based on factors such as traffic
volume, loading characteristics, design speed and desired performance...
Read More

Texas Department of Transportation Permeable - Hot Asphalt-Rubber Surface Treatments
Construct a surface treatment consisting of 1 or more applications of a single layer of hot asphalt-rubber (A-R) binder covered... Read More

Texas Department of Transportation Permeable Friction Course (PFC) Section 342
Construct a surface course composed of a compacted permeable mixture of aggregate, asphalt binder, and additives mixed hot in a mixing plant... Read More

Texas Department of Transportation Stone-Matrix Asphalt Section 346
Construct a pavement layer composed of a compacted stone-matrix asphalt (SMA) or stone-matrix asphalt rubber (SMAR) mixture of aggregate... Read More
Page 1 of 2
1
2
Categories:
Binder Properties   -   Case Studies   -   Cost   -   Emissions   -   Environmental   -   Guidelines   -   Miscellaneous   
Mix Properties   -   Noise   -   Performance   -   Preservation   -   Recyclability   -   Specifications   -   Warm Mix